Course Description
You can configure, debug, and manage enterprise wired and wireless networks with the help of the Implementing and Operating Cisco Enterprise Network-Core Technologies (ENCOR) v1.0 course. Additionally, you'll learn how to overlay network designs utilising SD-Access and SD-WAN solutions, as well as how to apply security concepts within an enterprise network.
Prerequisites
- You should be familiar with following before enrolling in this course:
- Installation of LAN networks for businesses.
- Basic knowledge of wireless networking and enterprise routing.
- Basic scripting skills in Python
Target Audience
- Mid-level network engineers
- Network administrators
- Network support technicians
- Help desk technicians
Learning Objectives
- Manage, configure, and troubleshoot enterprise wireless and wired networks.
- Apply security principles to a business network.
- Obtain 64 CEs to help with recertification. Use the access, distribution, and core layers to demonstrate the hierarchical network design model and architecture.
- While outlining the Ternary Content Addressable Memory (TCAM) and Content Addressable Memory (CAM), as well as process switching, rapid switching, and Cisco Express Forwarding principles, compare and contrast the various hardware and software switching processes and actions.
- Utilize VLANs and trunking to troubleshoot Layer 2 connectivity.
- application of the Spanning Tree Protocol to redundant switched networks.
- Using EtherChannel to solve link aggregation problems.
- Implementation and enhancement of IPv4 and IPv6 adjacencies, packet kinds, areas, summarization, and route filtering for Open Shortest Path First (OSPF)v2 and OSPFv3
- putting into practise single- and dual-homed networking, path selection, and interdomain routing for the External Border Gateway Protocol (EBGP)
- employing protocols like the Virtual Router Redundancy Protocol (VRRP) and Hot Standby Routing Protocol (HSRP) to implement network redundancy (VRRP)
- implementing network address translation using both static and dynamic addresses within an enterprise (NAT)
- Describe the various network devices and components' and servers' virtualization technologies.
- Putting in place overlay technologies such Location Identifier Separation Protocol, Generic Routing Encapsulation, and Virtual Routing and Forwarding (LISP)
- Describe the fundamental elements and ideas of wireless networking, such as antenna and Radio Frequency (RF) characteristics.
- Describe location services and wireless roaming.
- In order to receive software, configurations, and centralised management, explain how APs communicate with WLCs.
- Configure and test wireless client authentication using Extensible Authentication Protocol (EAP), WebAuth, and the Pre-shared Keys (PSK) on a WLC.
- Use the available tools to troubleshoot wireless client connectivity issues.
- Network Time Protocol (NTP), IP Service Level Arrangements, Cisco Internetwork Operating System (Cisco IOS®), Simple Network Management Protocol (SNMP), NetFlow, and Cisco IOS Embedded Event Manager are examples of tools used to troubleshoot enterprise networks.
- Describe how to use the various network analysis and troubleshooting tools, including show and debug commands and troubleshooting recommended practises.
Content Outline
- Cisco Enterprise Network Architecture Analysis
- The Cisco Switching Paths: Understanding
- Putting Campus LAN Connectivity in Place
- Building Switched Redundant Topology
- Layer 2 Port Aggregation implementation
- recognising EIGRP.
- OSPF implementation
- OSPF optimization.
- investigating EBGP
- putting in place network redundancy
- NAT implementation.
- Protocols and Techniques for Virtualization are introduced.
- Recognizing interfaces and virtual private networks.
- recognising the principles of wireless.
- Options for Wireless Deployment Analysis.
- Understanding location services and wireless roaming.
- Investigating Wireless AP Performance.
- Acquiring knowledge of Wireless Client Authentication.
- Wireless client connectivity troubleshooting.
- Let's talk about multicast protocols.
- QoS introduction
- putting network services into place.
- Using tools for network analysis.
- Infrastructure security implementation.
- putting Secure Access Control in place.
- Understanding the architecture for enterprise network security.
- Utilizing Cisco DNA Center to Investigate Automation and Assurance.
- taking a look at the Cisco SD-Access solution.
- Understanding the Cisco SD-WAN Solution's Operating Principles.
- learning the fundamentals of Python programming.
- Network Programmability Protocols are now available.
- vManage and Cisco DNA Center are introducing APIs.
Certification
- The 350-401 Implementing Cisco® Enterprise Network-Core Technologies (ENCOR) test, which is a requirement for four new certifications, is made easier by taking this course.
- CCNP® Business.
- Enterprise Infrastructure, a CCIE®.
- Enterprise Wireless CCIE.
- Enterprise core certified specialist by Cisco.
FAQs
The Implementing and Operating Cisco Enterprise Network-Core Technologies (ENCOR) v1. 2 courses give you the knowledge and skills to configure, troubleshoot, and manage Enterprise wired and wireless networks.
- You should be familiar with following before enrolling in this course:
- Putting in place enterprise LAN networks
- Basic familiarity with wireless connection and enterprise routing
- Basic familiarity with Python scripting
You can configure, debug, and manage enterprise wired and wireless networks with the help of the Implementing and Operating Cisco Enterprise Network-Core Technologies (ENCOR) v1.0 course. Additionally, you'll learn how to overlay network designs utilising SD-Access and SD-WAN solutions, as well as how to apply security concepts within an enterprise network.
To attend the training session, you should have operational Desktops or Laptops with the required specification and a good internet connection to access the labs.
We would always recommend you attend the live session to practice & clarify the doubts instantly and get more value from your investment. However, if, due to some contingency, you have to skip the class, Radiant Techlearning will help you with the recorded session of that particular day. However, those recorded sessions are not meant only for personal consumption and NOT for distribution or any commercial use.
Yes, your employer can pay your fees.
Yes, you can easily choose an EMI option through your credit card or Debit card.
You can submit payment to Radiant by:
- Debit or credit card
- Bank transfer
- Google pay