Course Description
You may implement advanced capabilities of the Cisco® Optical Networking Services (ONS) 15454 Multiservice-Transport Platform (MSTP) and Cisco-Network Convergence System (NCS) 2000 Series with the help of the Cisco Optical Technology Advanced (OPT300) v2.0 course. You will learn how to develop network topologies using the Cisco Transport Planner Design Tool in this course. Advanced Dense Wavelength Division Multiplexing (DWDM) technologies such G.709 encapsulation, the generic framing protocol G.7041, Layer 1 circuits, Quality of Service (QoS), cross-ponder networks employing T1 over Ethernet, and encryption will be covered.
The following cards are also covered in the course: the Cisco ONS 15454 80-Channel Wavelength Cross-Connect (WXC), the 100-Gbps transponder, the 10-Gbps muxponder and transponder, the 10-Gbps enhanced data multiplexer, the any-rate muxponder and cross ponder, the 10-Gigabit Ethernet Xponders 10GE-XP and enhanced GEXP, the 100-Gbps, 200-Gbps, and trans
Prerequisites
- Cisco Fundamentals of Fiber Optics Technology (FFOT) video training
- Cisco Optical Technology Intermediate (OPT200) course
- We also recommend that you have the following knowledge and skills:
- Basic understanding of optical transport and protocols
- Basic understanding of data network principles
Target Audience
This course is intended for the following technical-professionals who need to utilize advanced features of fiber optics technology:
- System installers
- System integrators
- System administrators
- Network administrators
- Solutions designers
Learning Objectives
- Put ONS 15454 MSTP node turn-up into action.
- Describe the topologies of first-generation meshes.
- Describe the prerequisite conditions for provisioning circuits in an ONS 15454 MSTP network that require an optical channel network connection (OCHNC).
- Describe the advanced ONS MSTP protocols.
- Give an explanation of the ROADM rings for Single Module (SM) Reconfigurable Optical Add-Drop Multiplexer (OCHNC) circuit provisioning.
- The Any-Rate Muxponder Crossponder (AR MXP/XP) cards should be described.
- Describe how to configure muxponder cards using the pseudo command line.
- List the benefits that G.709 encapsulation has for optical transponder cards.
- Configure and install the Any Rate cards.
- Give an explanation of the 100-Gbps and 200-Gbps cards.
- Describe the configuration of the 400-Gbps Xponder line card for the NCS 2000.
- Describe the setups based on SM ROADM (SMR).
- The 10-Gbps transponder and muxponder cards should be described.
- Give options for the 10GE XP and GE XP cards.
- Implement the customer QoS scheme into the ONS 15454 cross ponder network and provide ingress policing and fundamental egress queuing algorithms.
- Determine the Ethernet operating principles that apply to Cisco optical networking products.
- Install Layer 1 circuits, configure the 10GE XP/XPE and GE XP/XPE cards, and read the performance counters for Layer 1 Gigabit Ethernet circuits.
- Test the security of the data being transmitted by activating an encrypted network.
- To an existing DWDM ring, add a node.
- Describe issues with the ONS15454 MSTP 80-channel manual Multiring function, hardware components, and connecting circuits between rings.
- The ONS 15454 MSTP Troubleshooting Guide should be described.
Content Outline
- Cisco Transport Planner Design Tool
- First-Generation Mesh Topologies
- OCHNC in a Mesh Network
- Advanced Protocols
- Muxponder and Crossponders, in any case.
- Muxponders and Transponders at 100 and 200 Gbps.
- 400-Gbps Xponder Line Card for Cisco NCS 2000.
- Web Security Essentials (WSE) Network Encryption Card for Cisco 10G.
- Using Cisco Transport Planner (CTP) and Cisco Transport Controller, Adding a New Location (CTC).
- Networks at Layer 1 and crossponders.
- Networks using Layer 2 and crossponders.
- Troubleshooting.
FAQs
Cisco Platforms for End-To-End Network Connectivity
In addition to platform hardware and software, Cisco provides optical transceivers to connect the different switches and routers in this network
An optical network is a communication system that transmits data between two or more places using light signals rather than electronic ones. Computers in a workplace, sizable cities, or even entire countries participating in the global communications network might serve as the points.
The Cisco Optical Technology Advanced (OPT300) v2.0 course gives you the skills you need to deploy advanced features of the Cisco® Optical Networking Services (ONS) 15454 Multiservice Transport Platform (MSTP) and Cisco Network Convergence System (NCS) 2000 Series. In this course, you’ll learn how to use the Cisco Transport Planner Design Tool to create and advance network topologies. You will learn to use advanced Dense Wavelength Division Multiplexing (DWDM) features such as G.709 encapsulation, generic framing protocol G.7041, Layer 1 circuits, Quality of Service (QoS), cross ponder networks using T1 over Ethernet, and encryption.
- Cisco Fundamentals of Fiber Optics Technology (FFOT) video training
- Cisco Optical Technology Intermediate (OPT200) course
- We also recommend that you have the following knowledge and skills:
- Basic understanding of optical transport and protocols
- Basic understanding of data network principles
We would always recommend you attend the live session to practice & clarify the doubts instantly and get more value from your investment. However, if, due to some contingency, you have to skip the class, Radiant Techlearning will help you with the recorded session of that particular day. However, those recorded sessions are not meant only for personal consumption and NOT for distribution or any commercial use.
Yes, your employer can pay your fees.
Yes, you can easily choose an EMI option through your credit card or Debit card.
No. These training programs are helpful to improve your skills & knowledge of the technology which would help you to land your dream job by learning them. Our training program will maximize your ability and chances of getting a successful career. You have to select a job according to your convenience. Your performance in the training program and interview is crucial for getting a good job.
Radiant Techlearning has a data center containing a Virtual Training environment for participants’ hand-on-practice. Participants can easily access these labs over Cloud with the help of a remote desktop connection. Radiant virtual labs allow you to learn from anywhere and in any time zone.