Course Description
This training covers monitoring, managing & configuring your edge-to-core network with the HPE Intelligent Management Center software platform (HPE IMC). This training teaches how HPE IMC is installed, how devices are added through discovery, & then how they can be viewed. The training also goes through configuration management & explains how HPE IMC is used to manage firmware & configuration on devices. It covers how alarms are received & processed in HPE IMC, along with trap management. Then it looks at the Virtualization Resource Management (VRM) component against an ESXi host. This training teaches Access Control List (ACL) management, Network Traffic Analyzer (NTA), Compliance & Intelligent Policy Center, report management, & VXLAN management. The hands-on lab exercises utilize HPE IMC working with edge devices, including HPE Comware, Aruba AOS & CX & Cisco switches. This training is approximately 40 per cent lecture & learning activities, & 60 per cent hands-on lab activities.
This training is the combination of the following:
• HQ7C1S: HPE Intelligent Management Center - Managing & Monitoring your Network
• H61N0S: HPE Intelligent Management Center - Securing Network & Performance Management
Prerequisites
Prior to this training, professionals should have some networking experience to get the most from this training. They should:
• Understand networking
• Understand IPv4 addressing
• Have some knowledge of the CLI commands on HPE Aruba Switches (AOS & CX), HPE Comware v7 & Cisco (this knowledge is beneficial, but not required)
• Understand file architecture on HPE Comware & Aruba, including Telnet/SSH, & start-up & saved configurations
• Understand SNMP configuration
• Understand traps & how they are configured on the switches
Audience Profile
This training is for network administrators & engineers who plan to deploy, manage, monitor & configure their network using the HPE Intelligent Management Center software platform.
Learning Objectives
By the end of this class, you should be able to:
• Implement & deploy Access Control Lists (ACLs) using HPE IMC ACL management
• Configure & use the HPE IMC Network Traffic Analyzer module
• Configure & deploy Compliance Policy Center configuration
• Create & schedule reports
• Configure & deploy static VXLAN tunnels using HPE IMC VXLAN management
Content Outline
• Introduction
• HPE Intelligent Management Center design features, requirements, & modules
• HPE vLabs access
• Processes on the HPE Intelligent Management Center server
• How to login to HPE Intelligent Management Center
• Licensing structure
• Difference between an HPE Intelligent Management Center operator & an HPE Intelligent Management Center user
• Operator groups & how they can be mapped to operators
• How to install an HPE Intelligent Management Center module
• How to configure display tiling
• How to configure devices before you add them to HPE Intelligent Management Center
• How to configure access service templates
• How to use "auto-discovery" to add devices to HPE Intelligent Management Center
• How to use "add device" to add devices to HPE Intelligent Management Center
• How to modify device settings in HPE Intelligent Management Center
• How to use "check access settings" & interpret the output
• How to install DBman & backup HPE Intelligent Management Center
• How traps are received & processed by HPE Intelligent Management Center
• How to view & understand traps in HPE Intelligent Management Center
• How traps are filtered in HPE Intelligent Management Center
• How HPE Intelligent Management Center is used to create a trap definition
• How to import MIBS into HPE Intelligent Management Center
• Escalate a trap (event) to an alarm
• Access & manage the network topology
• Access the IP topology view
• Appreciate the difference between the IP view & IP topology view
• Create a custom view
• Create a port group view
• Create a data center topology
• How to backup software, define baseline software version & compare
• How to backup, baseline, & compare configurations
• How to schedule backups
• Understand the alarm window information
• How alarms are acknowledged & recovered
• How to edit the home screen
• How to cause an event to become an alarm
• Know how HPE Intelligent Management Center can work with edge ports
How HPE Intelligent Management Center manages & processes MIBs
How to manage global & device VLAN information
• Know the steps to deploy a VLAN
• Describe the types of performance metrics that a network admin can monitor using the HPE Intelligent Management Center
• Analyze the performance characteristics being tracked by HPE Intelligent Management Center • View, interpret, & configure performance widgets in the HPE Intelligent Management Center home window
• Describe the difference between global index settings & individual device monitoring settings
• Configure individual device monitoring settings
• Use topology maps to access device performance metrics
• Configure topology maps to display specific performance metrics
• Describe the difference between global index data & real-time monitoring data
• Configure real-time performance data
• An introduction to virtualization
• Adding virtual hosts to HPE Intelligent Management Center
• Using Virtual Resource Manager (VRM)
• An introduction to managing virtual devices in HPE Intelligent Management Center
• Troubleshoot HPE Intelligent Management Center using various scenarios
• Know where to look
• & know what to look for
• Describe the HPE IMC ACL management functionality
• Configure ACL using HPE IMC ACL management
• Deploy & test ACL usage
• Task1: Prepare devices & discover in HPE IMC
• Task1: Manually create an ACL for a device
• Task2: Verify ACL operations
• Task3: Setup syslog & verify ACL logging.
• Describe the sFlow protocol
• Describe Network Traffic Analyzer module functionalities
• Configure NTA analysis tasks
• Task1: Deploying the NTA component
• Task2: Add HPE Comware to NTA
• Task 3: Create a "Traffic Analysis Task."
• Task4: Perform host session monitoring
• Task5: Perform interface monitoring
• Describe HPE IMC Compliance Center functionality
• Configure HPEIMC Compliance Center tasks
• Task 1: Disable Syslog on the HPE Comware switch & create a configuration backup
• Task 2: Prepare compliance policy
• Task 3: Prepare & run check task
• Explain HPE IMC reporting possibilities
• Generate reports using HPE IMC reporting
• Task 1: My real-time reports
• Task 2: Custom reports
• Task 3: Scheduled reports
• Explain VXLAN management possibilities
• Configure VXLANs using the VXLAN management module
• Task 1: Setting up the switches
• Task 2: Setting up devices in remote locations
• Task 3: Managing VXLAN VTEPs & creating tunnels
• Task 4: Verify switch configurations & observe VXLAN topology
FAQs
A: Some of the trainings do have prerequisites. For information, go to the Training page, search for the training you are interested in, and then select it. The training prerequisites will be listed.
A: Aruba is economically autonomous. It's been largely dependent on tourism, but its efforts to diversify the economy have been progressively successful.
A: Aruba controllers & gateways deliver high-performance traffic & data routing, Dynamic Segmentation, role-based access, & more.
A: Aruba ESP (Edge Services Platform) is a next-generation, cloud-native architecture that allows you to accelerate digital business transformation through automated network management, Edge-to-cloud security, & predictive AI powered insights with up to 95% accuracy.
A: The Aruba Policy Enforcement Firewall (PEF) provides identity-based controls to enforce application-layer security & prioritization.
A: Aruba Networks, formerly known as Aruba Wireless Networks, is a Santa Clara, California-based Cloud-based security networking subsidiary of Hewlett Packard Enterprise company.
A: Protect users & networks by replacing static VLANs & ACLs with policy-based automation, advanced threat intelligence, & AI based device profiling. Ensuring users have reliable access, no matter how or where they connect.
A: To attend the training session, you should've operational Desktops or Laptops with the required specifications, along with a decent internet connection to access these labs.
A: We would always recommend you attend the live session to practice & clarify the doubts instantly & get more value from your investment. However, if, due to some contingency if you've to skip the class, Radiant Tech Learning will help you with the recorded session of that particular day. However, those recorded sessions are not meant only for personal consumption & NOT for distribution or any commercial use.
A: Radiant Tech Learning has a data centre containing a Virtual Training environment for the purpose of professional hand-on-practice. Professionals can easily access these labs over Cloud with the help of a remote desktop connection. Radiant virtual labs provide you with the flexibility to learn from anywhere in the world & at any time.
A: The learners will be enthralled as we engage them the real-world & Oriented industry projects during the training program. These projects will improve your skills & knowledge, & you will gain a better experience. These real-time projects will help you a lot in your future tasks & assignments.
A: You can request a refund if you do not wish to enroll in the training.
A: Yes, you can.
A: We use the best standards in Internet security. Any data retained isn't shared with third parties.
A: It is recommended but not mandatory. Being acquainted with the primary training material will enable professionals & the trainer to move at the desired pace during classes. You can access training for most vendors.
A: You can buy online from the page by clicking on "Buy Now". You can view alternate payment methods on the payment options page.
A: Yes, professionals can pay from the training page.
A: The training completion certification will be awarded to all the professionals who've completed the training program & the project assignment given by your instructor. You may use the certificate in your future job interviews will surely help you to l& your dream job.
Ans- Radiant believes in a practical & creative approach to training & development, which distinguishes it from other training & developmental platforms. Moreover, training is undertaken by some experts with a range of experience in their domain.
Ans- Radiant team of experts will be available at e-mail support@radianttechlearning.com to answer your technical queries even after the training program.
Ans- Yes, Radiant will provide you most updated high, value-relevant real-time projects & case studies in the training program.
Ans- Technical issues are unpredictable & might occur with us as well. Professionals have to ensure they have access to the required configuration with good internet speed.
Ans- Radiant Techlearning offers training programs on weekdays, weekends & combination of weekdays & weekends. We provide you with complete liberty to choose the schedule that suits your need.
A: Radiant has highly intensive selection criteria for Technology Trainers & Professionals who deliver training programs. Our trainers & professionals undergo rigorous technical & behavioural interview & assessment processes before they are on-boarded in the company.
Our Technology experts/trainers & professionals carry deep-dive knowledge in the technical subject & are certified by the OEM.
Our training programs are practically oriented with 70% – 80% hands-on training technology tools. Our training program focuses on one on one interaction with each professional, the latest content in the curriculum, real-time projects & case studies during the training program.
Our faculty will provide you with the knowledge of each training from the fundamental level in an easy way & you are free to ask your doubts any time from your respective faculty.
Our trainers have patience & ability to explain difficult concepts in a simplistic way with depth & width of knowledge.
To ensure quality learning, we provide a support session even after the training program.